Audio Features (Model Pv-C2081 Only) - Panasonic Quasar Omnivision PVQ-1311 Service Manual

Audio Features
<For Model PV-C2081 only>
Select Audio Mode for Playback
Choose the type of sound track for playback.
1
See the "Playback a Tape" section on page 14
to playback the tape.
2
H I F I ( L / R )
H I F I ( L )
H I F I ( R )
NORMAL
• This screen appears when
you press AUDIO during
playback.
Select Audio Mode for Recording
Choose audio mode to match recording type.
1
Press AUDIO repeatedly
to select the audio mode according to the type of
broadcast to be recorded.
• The Audio mode selected stays in effect until it is
changed.
2
See the "Record On a Tape" section on page
14 to do a recording.
Speaker ON/OFF System
Allows you to turn off the speaker of the unit when it
is connected to external audio equipment.
1
Press ACTION*
to display MAIN MENU.
2
M A I N MENU
T V VCR LANGUAGE
C H CLOCK
SELECT :
SET : ACT I ON
3
SET UP TV
LOCK
CAPT I ON
I NPUT SELECT : TUNER
V I DEO ADJUST
SET UP FM
SPEAKER SPE AKER : ON
SELECT :
SET :
END : ACT I ON
4
Press ACTION twice
to end setup.
40
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Press AUDIO repeatedly
(each press within 5 seconds)
to select desired mode.
• Select "HIFI (L/R)", "HIFI (L)"
or "HIFI (R)" to listen to
stereo recordings in stereo
sound. Select "NORMAL" for
monaural sound.
1) Press
"TV."
2) Press ACTION to
display SET UP TV
EX I T
screen.
1) Press
SPEAKER.
2) Press to set "ON" or
"OFF."
ON
• "OFF" MUTE and VOL + -
buttons do not fonction.
* Important: if a remote control button does not work
With the proper audio mode
setting, your unit can:
• record and playback MTS stereo
broadcast (main language) in
stereo Hi-Fi. Stereo sound is
recorded on the left and right
audio tracks and on the video
portion of a tape.
• record and playback a monaural
broadcast (main language) or
SAP (Secondary Audio Program,
usually in a second language) on
the Hi-Fi tracks for better quality
monaural sound.
• playback non-Hi-Fi tapes in
monaural.
to select
Notes
• Only tapes recorded in Hi-Fi stereo
will playback with true stereo
sound. Standard stereo tapes will
playback with monaural sound.
• To listen to Hi-Fi stereo playback,
to select
the unit AUDIO (L/R) jacks must be
connected to a stereo amp and
speakers.
• There may be a difference in audio
level between Hi-Fi and normal
audio playback.
when pressed, press the COMBO button
on the remote and try the button again.