Electrical Requirements; Battery Activation (Optional) - KitchenAid KXC13AV Manual

ELECTRIC KETTLE SAFETY

ELECTRICAL REQUIREMENTS

Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.

BATTERY ACTIVATION (OPTIONAL)

1
To provide power to the display when the
Electric Kettle is not on the base, insert
2 AA batteries (not included) in the battery
housing on the underside of the kettle.
W11387677A_V7.indd 5 W11387677A_V7.indd 5
Voltage: 220-240 Volts
Frequency: 50-60 Hertz
Wattage: 2400 Watts
NOTE: If the plug does not fit in the outlet,
contact a qualified electrician. Do not modify
the plug in any way.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or service technician install an
outlet near the appliance.
A short power supply cord (or detachable
power supply cord) should be used to reduce
the risk resulting from becoming entangled in
or tripped over a longer cord.
NOTE: If batteries have been added and
the Electric Kettle is off the base, the display
will show the current temperature of the
water. Placing the Electric Kettle back on the
base will allow full functionality of the kettle
to change the temperature, heat, and hold
temperature.
| 5
1/28/2020 6:36:32 PM 1/28/2020 6:36:32 PM