Wall Mounting
NOTE: Only use UL Certified wall mount kits.
Refer to the table below for the standard dimensions for wall mount kits.
Maximum
Hole pattern
Loading
14 kg
100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm
NOTE: Wall mount kits are sold separately.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down.
3. Remove the monitor stand.
4. Attach the mounting bracket to the VESA mounting holes at the rear of the
device. Then secure it with four (4) screws (M4 x 10 mm).
5. Follow the instructions that come with the wall mounting kit to mount the
monitor onto the wall.
Interface Pad
(W x H)
(W x H x D)
100 mm
Pad Hole
11
Screw Specification
& Quantity
M4 x 10 mm
4 pieces