Advertisement
CAUTION
Engine coolant is toxic. Swallowing engine
coolant can cause poisoning.
• Do Not swallow engine coolant.
• Keep out of reach from children and pets.
With cool engine, check that coolant level is up to the
indicator line on the overflow bottle. If not, add 50/50
coolant mix to overflow bottle to bring the level up to
the indicator line. Also check coolant level in radiator.
Fill it as high as possible with 50/50 coolant mix.
Note: Units should only be filled with Dex Cool©
extended life coolant, which can be identified by its
orange color.
Servicing the Hydraulic Oil
The machine is shipped filled with hydraulic oil in the
reservoir.
1. Check hydraulic reservoir and if necessary fill to the
appropriate level with Exmark Premium Hydro Oil.
2. Adjust the seat to the most forward position to
access the caps on the LH and RH hydro drives.
3. Remove the cap, wipe the dipstick clean, and re-insert
the cap back into the hydro. Loosely tighten the cap.
4. Remove the cap again and check the level of the oil
on the dipstick. See Figure 2 for oil levels.
1. Full
Note: The oil level on the dipstick will be incorrect
if the oil is checked when the unit is hot.
5. If the dipstick oil level is at the "add" mark add
Exmark Premium Hydro oil.
6. Replace hydraulic reservoir cap and tighten until
snug. Do Not overtighten.
Figure 2
2. Add
Filling Out the Product
Registration
Fill out the product registration online and place keys
into literature pack.
3
Advertisement
