Table of Contents
Advertisement
Video Settings
Video
Picture Mode
HDR Video
Dynamic
Standard
Conferencing
HighBright
Custom
Advanced Video
Aspect Ratio
Normal
1:1
Full
Zoom
Overscan
Auto
On
Off
Color Temperature
Cool
Normal
Warm
Native
Custom
Noise Reduction
Adaptive Contrast
Provides pre-configured video settings suitable for various environments where this device
may be used, or customize settings to your preference.
Video setting for the HDR format. (Can be selected only when an HDR signal is input.)
High-contrast video setting.
Standard setting.
Video setting suited for video conferences.
Maximum backlight brightness with higher color temperature for brighter ambient environments.
Customizable settings.
Menu used to adjust detailed video settings.
Select the aspect ratio of the screen image. For more information, see "Setting the Aspect
Ratio" in this manual.
Maximizes the size without changing the aspect ratio.
Shows the image in a 1 by 1 pixel format. (If the input resolution is higher than the
recommended resolution, the image will be scaled down to fit the screen).
Fills the entire screen even if the aspect ratio needs to be changed.
Fills the entire screen without changing the aspect ratio.
NOTE:
The areas of the image that are outside of the active screen area are not shown.
Selects the image display area.
The image display area is set automatically.
Approximately 95 % of the image will be shown on the screen.
The whole image is displayed within the screen area. This setting may cause noise at the
edges of the screen depending on the signal.
NOTE:
When you use a computer with an HDMI output, set it to [OFF].
Adjusts the color temperature of the entire screen.
A low color temperature will result in a reddish screen. A high color temperature will make the
screen bluish.
If a temperature needs further adjustment, the individual R/G/B/ levels of the white point can
be adjusted.
High color temperature setting. The screen will be bluish.
Intermediate setting.
Low color temperature setting. The screen will be reddish.
Turns the color temperature adjustment off and displays the image with the panel
characteristics.
Customizable settings.
Reduces the image noise.
Adjusts automatically the contrast according to the image. If [High] is set, the image is shown
clearly but the brightness variation may appear not natural.
69
Advertisement
Table of Contents
