How To Replace: Lamp; Troubleshooting; What To Do If - Electrolux EVL8E08X User Manual

Hide thumbs Also See for EVL8E08X:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 111

TROUBLESHOOTING

Install the shelf supports in the opposite sequence.

11.3 How to replace: Lamp

WARNING!
Risk of electric shock.
The lamp can be hot.
Always hold the halogen lamp with a cloth to prevent grease residue from burning on the lamp.
Step 1
Turn off the oven. Wait until
the oven is cold.
Top lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.

12.1 What to do if...

The oven does not turn on or does not heat up
Possible cause
The oven is not connected to an electrical sup‐
ply or it is connected incorrectly.
138/468
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
Check if the oven is correctly connected to the
electrical supply.
Put a cloth on the bottom of
the cavity.
Remedy
Step 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Evl8e08zKvlbe08x

Table of Contents