Table of Contents
Advertisement
Performing a New Installation of Cisco MNM
Software Installation Tool Completed
Possible Warnings/Errors Encountered
The warning and error messages that appear after these messages do not hinder the installation. They
only indicate that you need to take corrective actions after the installation is complete.
Your Solaris machine has successfully installed CiscoView.
For more CiscoView installation details, see the Installation and Setup Guide for CiscoView 5.4
(Standalone) at
http://www.cisco.com/en/US/products/sw/cscowork/ps4565/products_installation_guide_book09186a0
0800e19f6.html
To get the supported device list, see the User Guide for CiscoView 6.1.8 at
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_ciscoview/6.1.8/user/guide/cv618_ug.html
After installing CiscoView 6.1.8, get the support list for Signaling Link Terminals ITP-Ls and Media
Gateways (MGWs) by logging in to the CiscoView server. If your Cisco ITP-L or MGW isn't included
in the list, download the device package at
http://www.cisco.com/cgi-bin/Software/CiscoView/cvplanner.cgi
Add the device package by following the instructions provided in the readme file.
Task 8: Install Cisco EMF 3.2
Follow the procedures below to install Cisco EMF 3.2 on a standalone system or on both machines
(Management server and Presentation server) in a distributed configuration.
For more information on the Cisco EMF 3.2 installation, see the Cisco Element Management Framework
Installation and Administration Guide at
http://www.cisco.com/en/US/docs/net_mgmt/element_manager_system/3.2_service_pack_7/installatio
n/guide/3_2p7adm.pdf
Installing Cisco EMF 3.2 on the Management Server
Step 1
Log in as the root user on the machine where Cisco EMF is to be installed.
Insert the Cisco EMF 3.2 Service Pack 7 Disk 1 in the CD-ROM drive.
Step 2
Change the folder using the following command:
Step 3
# cd /cdrom/cdrom0
Invoke the Cisco EMF installation script using the following command:
Step 4
# ./cemfinstall
A menu listing the Cisco EMF installation options displays.
Step 5
Choose the Cisco Element Manager Framework - Server option, and press Enter.
Step 6
Accept the default location for the installation (<CEMF_ROOT>) and press Enter.
Step 7
Accept the default location (/opt/Backup) and press Enter.
Cisco Media Gateway Controller Node Manager Installation Guide
2-8
Chapter 2
Installing Cisco MNM
OL-18332-04
Advertisement
Table of Contents
