Floor fixing dimensions of the outdoor unit (Unit:mm) HSU-18CG13-B Fix the unit to concrete or block with bolts( 10mm) and nuts firmly and horizontally. When fitting the unit to wall surface, roof or rooftop, fix a supporter surely with nails or wires in consideration of earthquake and strong wind.
Indoor unit 1.Fitting of the Mounting Plate and Positioning of the wall Hole When the mounting plate is first fixed 1.Carry out, based on the neighboring pillars or lintels, a proper leveling for the plate to be fixed against the wall, then temporarily fasten the plate with one steel nail. 2.
1. Insert the drain hose into the dent of heat insulation materials of indoor unit. 2. Insert the indoor/outdoor electric cable from backside of indoor unit, and pull it out on the front side, then connect them. 3. Coat the flaring seal face with refrigerant oil and connect pipes. Cover the connection part with heat insulation materials closely, and make sure fixing with adhesive tape Lid for right piping Lid for under piping...
3mm. Indoor unit Outdoor unit HSU-12CG13-B Indoor unit HSU-24CG13-B Indoor unit Indoor unit Outdoor unit HSU-18CG13-B connecting wiring: -mod 09-12: L、N 、 : -mod L、N、 : POWER -mod 24: 6G0.75mm...
Outdoor unit 1.Installation of Outdoor Unit Drawing for the installation of indoor and outdoor units Install according to 2.Connection of pipes To bend a pipe, give the roundness as large as possible not to crush the pipe Connecting the pipe of gas side first makes working easier. The max vertical distance between the indoor unit and the outdoor unit is 5 m.
(only for 24k ) can be used to purge air or 80g (only for 24k )refrigerant will be discharged in piping. and 10 sec.) 2-way valve 6.35mm(1/4") 3-way valve 9.52mm(3/8") HSU-09CG13-B HSU-12CG13-B 2-way valve 3-way valve 6.35mm(1/4") 12.7mm(1/2") HSU-18CG13-B 2-way valve 3-way valve 9.52mm(3/8") 15.88mm(5/8") HSU-24CG13-B...
1.Power Source Installation The power source must be exclusively used for air conditioner. (Over I0A) In the case of installing an air conditioner in a moist place, please install an earth leakage breaker. For installation in other places, use a circuit breaker as far as possible.