Intel PLAY SOUND MORPHER Quick Start

QUICK START
Congratulations on your purchase of the Intel
Computer Sound Morpher and software.
Battery Installation:
Your Computer Sound Morpher requires three "AAA" batteries, which are not included. Before you begin installation, please install the
batteries in the battery compartment, located on the back of the Computer Sound Morpher, as follows:
Connect the Computer Sound Morpher to the computer:
Plug the microphone labeled end of the Computer Sound Morpher's connecting cable into the Mic-In port on your computer. The
location of this port differs, depending on the type of computer you own. Common Mic-In icons are seen illustrated below.
PLEASE NOTE: The Computer Sound Morpher needs to be connected to the computer to successfully complete the software install.
You will not be able to download recorded sounds or make live recordings, unless you have plugged in the connecting cable to both the
Computer Sound Morpher and the computer. When you are using your Computer Sound Morpher away from the computer, be sure to
disconnect the download cable from the Computer Sound Morpher.
Install the software:
1. Place CD in your CD-ROM drive.
2. The program will automatically launch the installation program.
3. When you have read and accepted the License Agreement, click "Yes." The installation wizard will guide you through the
installation process.
Now the software program will lead you through the installation process. It will verify that you have the microphone correctly in place
and will verify audio support for your computer. After you have completed the software installation, restart your computer. Then, double
click on the Computer Sound Morpher icon to launch the software.
® Play ™ Computer Sound Morpher. Please follow the instructions below to install your
THIS IS NOT A USB DEVICE.
The cable connects to your computer through the microphone-in jack.
1
27781-0920