Samsung DW60A807 Series User Manual page 359

A
F
C
E
U P
D O
W N
DW8500AM_DW60A8070BB_ET_DD81-03206A-01_DE+IT+FR+NL+EN.indb 23 DW8500AM_DW60A8070BB_ET_DD81-03206A-01_DE+IT+FR+NL+EN.indb 23
D
C
30 mm
30°
UP
DO
WN
4. Tighten the door bracket (C) with
8 screws (D, Ø4 X 14) as shown in the
figure.
5. Insert the door brackets (C) on the
custom panel to the holes (E) on the
dishwasher door to fix the custom panel.
6. While holding the custom panel, attach
it to the door and insert the custom
panel fixers (A) into the holes (F) as
shown in the figure.
7. Push the custom panel downward to fix.
CAUTION
Do not let the custom panel extend
more than 30 mm from the top of the
dishwasher.
8. Adjust the spring level while the door
is approximately opened at 30 degrees.
The door should hold its position, and
should not fall open.
CAUTION
• Do not adjust the spring level while the
door is completely opened.
• If the custom panel weighs more than
7 kg, the door may fall open.
• Custom panels weighing more than 7 kg
are not recommended.
English 23
2021-03-24 2021-03-24 1:14:17 1:14:17