Table of Contents
Advertisement
NOTE
The unit cannot detect the device unless the Bluetooth setting menu is displayed on the
smartphone screen.
4
Touch the desired device on the screen.
The unit configures the connection then starts the application.
TIP
If the device that you want to connect does not appear, touch
TIP
You can use voice recognition function by touching
NOTES
• For details on USB connection, refer to the Installation Manual.
• When the device for Android Auto is connected to this unit, the device is also connected via
Bluetooth at the same time. If five devices are already paired, the message confirming whether to
delete the registered device is displayed. If you want to delete the device, touch [Agree]. If you want
to delete other device, touch [Go to DeviceList] and delete the devices manually (page 102).
• If Android Auto is turned on during a call on a mobile phone other than the Android Auto compatible
device, the Bluetooth connection will switch to the Android Auto compatible device after the call.
Adjusting the volume
You can adjust the guidance volume separately from the main sound volume when
Android Auto is used.
1
While Android Auto is activated, touch VOL (+/-).
The volume menu will be displayed on the screen.
Touch to mute. Touch again to cancel mute.
Touch [+]/[-] to adjust the guidance volume.
Displays the main sound volume. To adjust the main sound volume, touch
VOL (+/-) on the unit or touch [+]/[-].
NOTE
The volume menu is displayed for four seconds. If the menu disappears, touch VOL (+/-) again. The
menu reappears.
button once Android Auto is activated.
- 68 -
on the screen again.
Advertisement
Table of Contents
