Samsung SM-G386U User Manual page 64

Web & network
Reading information from an NFC tag
Place the NFC antenna area on the back of your device near an NFC tag. The information from
the tag will appear.
Making a purchase with the NFC feature
Before you can use the NFC feature to make payments, you must register for the mobile
payment service. To register or get details about the service, contact your service provider.
Touch the back of your device to the NFC card reader.
Sending data via Android Beam
Use the Android Beam feature to send data, such as webpages and contacts, to NFC-enabled
devices.
On the Applications screen, tap Settings → Connections → NFC. Drag the Android Beam
switch to the right.
Select an item, find the location of the NFC antenna on the other device, touch the other
device's antenna with your device's antenna, and then tap your device's screen.
S Beam
Use this feature to send data, such as videos, images, and documents.
Do not send copyright-protected data via S Beam. Doing so may violate copyright
laws. Samsung is not responsible for any liabilities caused by the illegal use of
copyrighted data.
On the Applications screen, tap Settings → Connections → S Beam. Drag the S Beam switch
to the right.
Select an item, find the location of the NFC antenna on the other device, touch the other
device's antenna with your device's antenna, and then tap your device's screen.
If both devices try to send data simultaneously, the file transfer may fail.
64