Maintenance; Protecting The Environment - DeWalt DC305 Original Instructions Manual

E N G L I S H

MAINTENANCE

Your D WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING:
● Unplug the charger before cleaning the
housing with a soft cloth.
● Remove the battery pack before
cleaning your power tool.
● Keep the ventilation slots clear and
regularly clean the housing with a soft
cloth.
Optional accessories
WARNING: Since accessories, other
than those offered by D
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D WALT, recommended
E
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.

Protecting the environment

Separate collection. This product must
not be disposed of with normal
household waste.
Should you fi nd one day that your
D WALT product needs replacement, or if it is
E
of no further use to you, do not dispose of it with
household waste. Make this product available for
separate collection.
36
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
D WALT provides a facility for the collection and
E
recycling of D
reached the end of their working life. To take
advantage of this service please return your
product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D WALT offi ce at the address indicated in this
E
manual. Alternatively, a list of authorised D
repair agents and full details of our after-sales
service and contacts are available on the Internet
at: www.2helpU.com .
WALT, have
E
Battery pack
The long life battery pack must be recharged when
it fails to produce suffi cient power on jobs which
were easily done before. At the end of its technical
life, discard it with due care for our environment:
● Run the battery pack down completely, then
remove it from the tool.
● Li-Ion cells are recyclable. Take them to your
dealer or a local recycling station. The collected
battery packs will be recycled or disposed of
properly.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
WALT products once they have
E
WALT
E