Table of Contents

Advertisement

Available languages

Available languages

Problems and troubleshooting
The remote doesn't work:
· Confirm with your original remote that the equipment works correctly.
· Make sure that you have pressed the corresponding Mode key of the equipment or device that
you want to control.
· If the listed code does not work, try the AUTOSEARCH method or enter the next code of that
brand.
· To find the corresponding code for your equipment use the automatic search.
· Check that the batteries have the correct polarity position.
· The programming of the remote requires 2 CR2032 Lithium batteries 3 Volt (new).
· If the red indicator is lit permanently, in general it will be necessary to replace the batteries.
There are several device codes listed under the brand name of my device. How do I
determine the correct device code?
· To determine the correct device code for your device, try each consecutive code until most of
the functions of the device function properly.
The devices only respond to a few remote control commands:
· Continue testing further codes until the devices respond to the commands accordingly.
· If manual code entry and automatic code search are unsuccessful, it may be that the device is
not compatible to your universal remote control. For 8in1 universal remote (item no. 55414) try
to learn the functions from your original remote (see paragraph Learning function).
Having problems with learning?
• See Learning Tips on page 16.
• Some learned keys transmit multiple times, e.g. if a learned Channel Up key changes more
than one channel when you press it, or Up/Down/Left/Right navigation keys move more than
one step when you press the learned key; try just giving the key to be learned a quick press
(when you learn it).
Important:
The Universal Remote Control must be used only in the way described in this instruction manual
and may not be used for a purpose not intended.
Declaration of conformity
If necessary, the conformity declaration for this product can be obtained under the following
email address: info@sm-electronic.de

Warranty

SM Electronic GmbH and its suppliers do not accept any liability for any loss of data which
occurs when using the device or for the resulting consequences. The remote control unit
transmits various code sequences, which may call up undesired functions. SM Electronic GmbH
does not accept any liability for the consequences.
Handbook updates
Our handbooks can be obtained under the following address: www.sm-electronic.de
Dear customer,
Please note that unjustified complaints are subject to a charge.
Help: We provide help with our telephone HOTLINE. Here, experts give you rapid advice and hints
to localise the possible cause of any faults. If the device is faulty, please send it for repair, giving
a precise description of the fault.
Returns Centre • Großer Kamp 9 • D-22885 Barsbüttel • Germany
Internet: www.skymaster.de • Email: info@sm-electronic.de
We reserve the right to make technical modifications. TELEFUNKEN
Waste electrical and electronic equipment is classed as recyclable waste and
does not belong in domestic refuse!
We therefore request you to actively support the conservation of resources and
environmental protection and to dispose of this device at responsible take back
points – if possible.
Our HOTLINE:
01805 773 759
(€ 0.14/minute from German landlines. calls from abroad may differ.)
(Mobile phone prices may differ and cost a maximum of € 0.42/minute)
Monday to Sunday from 8:00 – 22:00
SM ELECTRONIC GmbH
®
is a registered trademark.
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Trc 400Trc 800

Table of Contents