Switching The Power On Or Off - HTC Sensation XE User Manual

15 Getting started
Charging the battery
The battery is partially charged when shipped. Before you turn on and start using HTC
Sensation XE with Beats Audio, it is recommended that you charge the battery. Some
batteries perform best after several full charge/discharge cycles.
§ The battery is already installed in HTC Sensation XE with Beats Audio when
shipped. A thin film is inserted between the battery and the compartment. You
need to remove this film before you can charge the battery.
§ Only the power adapter and USB sync cable provided in the box must be used to
charge the battery.
§ Do not remove the battery from HTC Sensation XE with Beats Audio while you are
charging it using the power or car adapter.
1. Plug the power adapter into the USB connector.
2. Plug in the power adapter to an electrical outlet to start charging the battery.
As the battery is being charged, the notification LED shows a solid orange light. The
light turns to solid green when the battery is fully charged.
When you charge the battery and HTC Sensation XE with Beats Audio is on, the
charging battery icon
charged, the charging battery icon turns to a full battery icon
As a safety precaution, the battery stops charging when it overheats.

Switching the power on or off

Switching the power on
Press the POWER button. Easy.
When you turn on HTC Sensation XE with Beats Audio for the first time, you'll need
to set it up.
is displayed in the status bar. After the battery has been fully
.