Philips Sonicare FlexCare Platinum User Manual page 12

EngliSh
12
35_020_7270_1_DFU-Luxury_A6_v4.indd 12
gum care: Combines the Clean mode with
3
an additional minute to gently stimulate and
massage gums to improve gum health.
The Sonicare comes with the Clean mode
activated.
Note: When the toothbrush is switched on, you
cannot toggle between modes.
1 Before you switch on the Sonicare, press the
mode button to toggle between modes.
, The selected brushing mode lights up.
, Once a brushing mode has been selected, it
remains active until another brushing mode is
selected.
Note: When the Sonicare is used in clinical studies,
the default 2-minute Clean mode must be selected.
The handle has to be fully charged and the Easy-start
feature must be deactivated.
intensity levels per mode
- low: 1 LED indicator light
- Medium: 2 LED indicator lights
- High: 3 LED indicator lights
Note: To adjust the intensity level to the next higher
or lower level, you can press the + button to increase
intensity or the - button to decrease intensity at any
time during the brushing cycle.
Pressure sensor
A change in vibration (and a slight change in sound)
alerts you when you apply too much pressure
while brushing. See chapter 'Features'.
9/23/13 3:54 PM