Samsung SCC-C7453P User Manual page 13

3. Tie up the SAFETY WIRE of the CAMERA on the BRACKET WIRE of the FRAME
SET.
Arrange the 22P CONNECTOR of the CAMERA in line with that of the ADAPTOR,
push the HOOKs on either end of the CAMERA in the RACK direction of the
FRAME SET to secure the two.
Then, ensure that all of the two HOOKs clicks to fi x to the RACK properly.
22P CONNECTOR
RACK
BRACKET WIRE
FRAME SET
SAFETY WIRE
HOOK
CAMERA
M 
When the installation is completed, remove the PROTECTIVE COVER and
PRETOECTIVE TAPE from the lens.
4. Align each of the 3 SCREWS of COVER DOME and 3 SCREW HOLEs of the
HOUSING respectively, and assemble the COVER DOME and HOUSING. During
the assembling, note on the followings.
Insert and arrange SAFETY WIRE into the HOUSING while not disturbing the
camera operation.
Ensure that the GASKET DOME component does not separate from the
COVER DOME. (If the GASKET DOME is not properly assembled, it damages
the waterproofness.)
HOUSING
CAMERA
GASKET DOME
HOUSING
RACK
HOOK
SAFETY WIRE
HOUSING
COVER DOME
COVER DOME
PROTECTIVE
TAPE
PROTECTIVE
COVER
SCREWS
English _13