Text Message - HP iPAQ hw6510 Manual

NOTE: You must have a Subscriber Identity Module (SIM) card installed
in your HP iPAQ to send and receive text messages. A SIM card either
came with your unit or must be purchased from a mobile phone service
provider or electronics store.
You can send text messages from Messaging or by using the
Phone keypad:
From Messaging, tap Accounts > Text Messages > New.
1.
From the Today screen, tap Start > Phone > Tools > Send

Text Message.

In the To field, enter the text message phone number of one or
2.
more recipients, separating them with a semicolon. To access
phone numbers from Contacts, tap Address Book in the
Navigation bar.
3. Enter a subject and your message. To quickly add a canned
message, tap My Text and tap a desired message.
To check spelling, tap Tools > Spell Check.
4.
5. When the message is finished, tap Send. If you are in an area
with no service coverage, the message is moved to the Outbox
folder and is sent the next time you connect.
NOTE: If you are sending a text message and want to know if it was
received, before sending the message, tap Tools > Options, and select
Request message delivery notification.
To receive a text message:
1. When you receive text messages, the e-mail icon
Navigation bar and the message displays on the HP iPAQ screen. If
the HP iPAQ is turned off (or not currently being used), the message
is stored in the Text Messaging Inbox folder.
displays in the
26