Keurig K-4500 Quick Start Manual page 6

K-4500™ COFFEE MAKER
4
Rinse Brew
When prompted to select your
beverage, press 12 oz. and then the
button to start the brewer rinse cycle.
Repeat brewer rinse cycle 2 or more
times. When the brewer rinse cycle is
complete, discard the hot water from
the mug. The coffee maker will enter
standby mode and will be ready to
brew your first K-Cup® pod.
CAUTION: During the brewing process,
there is extremely hot water passing
through the K-Cup® pod holder. To
avoid injury, do not lift the handle
during the brewing process.
BEFORE YOU BREW, CONT.
5
Filling Powder Hoppers
To fill the powder hoppers, open the
pod bin door. Open the door with the
display by using the button found on the
left-hand side under the touch screen
door. Push down on the clips that hold
the powder hoppers and pull the hoppers
forward. Remove the lids to the powder
hoppers and pour the milk powder into
the larger hopper and the flavor powder
into the smaller hopper. Replace the lids.
Push the powder hoppers back in and
close the door.
6