Table of Contents
Advertisement
9.9. Disassembly of CD loading unit
9.9.1. Regarding a jig "gear"
- The gear is equipped to the unit to check the opening and closing
of the disk tray and the hoisting of traverse unit manually at the
maintenance service. (The usage of the gear is described in this
disassembly procedure).
- As to the preparation of the gear jig, follow the following
procedure. / And, in case of the repair using the same set at
second time onward, it is requested to keep used "gear" as it may
possibly not be attached at the top cover part because it is already
33
Advertisement
Table of Contents
