Table of Contents
Advertisement
2.7.4
Power Management
2.7.4.1 Meet VESA DPMS proposal
The monitor must comply with the Microsoft On Now specification, with a minimum of three power
management states, as defined by the VESA DPMS document. The front panel of the monitor must
appropriately display the DPMS state, For example:
DPMS ON :
DPMS OFF :
2.7.5
Power Consumption
On mode
Off mode
DC power off
disconnection
Power saving states are measured with speakers attached but not worked.
The recovery time from stand by /suspend/off mode to on mode is 3 seconds maximun.
2.7.6 Power Connector
All units shall have an IEC/CEE-22 type male power receptacle.
2.8 Plug & Play (EDID)
The monitor will be capable of sending a VESA standardized EDID file through the DDC (pins 12,
15 of the VGA connector).
The power LED is Green
The power LED is Amber
40Wmax (EP878)
48Wmax (EP877)
3Wmax
3Wmax
3Wmax
19
Green
Amber
Dark
Dark (DC power off)
Amber (DC power on)
Advertisement
Table of Contents
