Replacing The Processor - HP Workstation x1000 Supplementary Manual

Removing and replacing the processor

Hide thumbs Also See for Workstation x1000:

replacing the processor

1. Ensure that you are properly ground with an anti-static strap.

2. Replace the processor in its socket. To properly replace the processor in its

socket, you must align the beveled corner of the processor with the corner of the

socket closest to the socket release lever. See Figure 7.

Figure 7. Replacing the Processor in Its Socket

3. Pull down on the processor socket's release lever until it snaps in place. This

secures the processor in its socket. See Figure 8.

Figure 8. Pull Down on the Processor Socket's Release Lever

Table of Contents