Sharp 4T-C50BJ4KF2FB Operating Instructions Manual page 9

Smart uhd led tv with freeview hd

Table of Contents

Securing the TV to a wall/wall mounting

SECURING THE TV TO A WALL

When mounting your set onto a wall bracket and installing a set with rear pointing connectors, it may

be necessary to stand the set off the wall to allow any leads connected to the rear of the set to ﬁ t

correctly. To facilitate this, spacers and longer screws are included in the accessory pack to increase the

gap between the wall bracket and set. These parts are as shown below:

4 x Screw including washer

4 x Spacer

These should be used as indicated in the picture below. Ensure that the screws are not overtightened as

this may cause damage to the set.

Note: the wall bracket type

shown in the diagram is

for illustration purposes

only, other brackets may be

used and it is recommended

that the spacers and screws

are tested to see if they ﬁ t

correctly before ﬁ nal assembly.

Important – Only use the screws provided to mount the set onto a wall bracket. When using a wall

bracket, please ensure the screws in the back of the TV set are not over tightened. Failure to use the

correct screws may lead to damage.

UNI - User Guide - Sharp SMART UHD LED TV with Freeview HD models wall mount design.indd Sec1:9

27/08/2019 10:06:47

Table of Contents