HP Vectra XA5 User Manual page 61

Integrated Network Interface Submenu (Configuration group)
Setup Item
Integrated Ethernet Interface
1. If an asterisk (*) appears in front of this value, then you will see the following message in the
lower part of the screen:
[*] = The device is disabled for security reasons. To enable it,
use the Security/Hardware Protection menu.
(Refer to the Hardware Protection submenu under the Security group.)
PCI Devices Submenu (Configuration group)
Setup Item
Slot #1 Bus Master
Slot #2 Bus Master
Slot #3 Bus Master
PCI IRQ line 1
PCI IRQ line 2
PCI IRQ line 3
PCI IRQ line 4
Understanding the SETUP Program
1
Default
[Enabled] Enables or disables the integrated
LAN interface.
Default
[Enabled] Enable this option if you need the
BIOS to set the PCI Bus Master bit.
[Enabled]
This could be necessary for some
[Enabled] older PCI accessory boards.
[Auto] Select an IRQ number only if
necessary (for example for
[Auto]
SCO-UNIX).
[Auto]
[Auto]
3 The HP Setup Program
Action
Action
English 49