HP Vectra VLi8 User Manual page 9

1 Setting Up and Using Your PC
Connecting to a Network (Some Models Only)
Connecting to a Network (Some Models Only)
Let your Network Administrator know you are connecting your PC to
the network.
Connect the network cable to the RJ-45 UTP (Unshielded Twisted
Pair) LAN connector.
10/100BT
Connector
If you install a non-HP network adapter card, refer to the installation
and configuration information provided on HP's Support web site. Go to
the section at .
LAN Card Ready www.hp.com/go/vectrasupport
English 5