24
Seats and Restraints
Carpet Floor Covering
Vinyl Floor Covering
The left side pin has a gray cap with a
black L marked on it.
Carpet Floor Covering
Vinyl Floor Covering
The right side pin has a black cap with a
white R marked on it.
On a four-passenger seat, each half of
the seat has a set of pins. The left side
has a set marked L , and the right side
has a set marked R .
If the vehicle is equipped with a vinyl
floor covering, the pins are under a flap
that has been cut into the vinyl.
3. If equipped, release the pin from the lock
ring by pushing down on the top of the
ring and lifting the lock tab from
the ring.
4. Pull the pin handle up to disengage the
pin from the retaining clip, and then pull
the pin out.
5. Repeat this procedure for the other pins.
6. Pull the seat rearward about 5 cm (2 in),
and then lift the seat from the floor
rails.
7. Remove the seat from the vehicle.