Getting Started; Install Batteries - Honeywell 5403 User Manual

GETTING STARTED

1. Remove the override key cover (Figure 1).
2. Insert the override access key into the lock (Figure 2).
3. With the key inserted, turn clockwise to the right (Figure 3).
4. Remove override access key and store it in a safe place away from the safe.
Replace the cover over the key lock, leave safe door open, and proceed to

"Install Batteries".

Figure 1
INSTALL BATTERIES
The batteries must be installed before using your safe. The battery compartment is inside
the safe and opened by lifting the tab located on the side.
1. Remove battery compartment cover (Figure 1).
2. Insert 4 "AA" batteries. Make sure that the batteries are installed in the correct direction
(+ and -) with regard to polarity (Figure 2).
3. Replace the battery cover (Figure 3).
4. Proceed to the "Testing Digital Safe" section on next page.
Figure 1
Figure 2 Figure 3
Figure 2 Figure 3
2