The Action Section [Action]; The General Information Section [Generalinfo]; Running Setup.exe - HP Vectra E-Vectra Deployment Manual

InstallToptoolsUI: Possible values are 1 or 0. The local user interface of the Toptools for Desktops Agent
will be installed if InstallToptoolsUS=1.
InstallSMSWin: Possible values are 0 and 1. If it is 1 (default), the SMSWin program will be installed.
InstallResMon: Possible values are 0 and 1. The System Resource Monitoring module is always installed.
If the value of this parameter is 1, it will be activated. The default is 0.
InstallSoftPowerDown: Possible values are 0 and 1. The value 1 (default) is valid for Windows NT only,
and the HP SoftPowerDown utility will be installed. Please note that SoftPowerDown 6.0 will not be
installed if the system is running a version older than 2.2 of the HP Lock Utility for Windows NT.
InstallDir: This is the installation directory (full path). It is a character string, and its maximum size is 64
characters. Example setting for this item: InstallDir=C:\DMI.

10.2.2 The Action Section [Action]

This section describes the action allowed during the Toptools installation procedure. It contains 1 item:
Insert: The possible values you can set for this item are 1 or 0. If you set this item to 1, the Toptools
SETUP.EXE program will overwrite the installation directory if it already exists.

10.2.3 The General Information Section [GeneralInfo]

This section contains default values used by the batch installation process for some DMI attributes. You
can change the values for all of these attributes, except PCSerialNumber, after the installation process.
The installation process automatically updates PCSerialNumber if the system supports it. The installation
process automatically updates MonitorSerialNumber if the monitor, BIOS and operating system support
DDC calls. (This does not work for Windows NT, as NT does not support DDC calls.)
SystemName: The name of the PC. It is a character string that cannot exceed 64 characters. This attribute
is not available for the WMI agent.
SystemUserName: The name of the primary user of the PC. It is a character string that cannot exceed 64
characters. This attribute is not available for the WMI agent.
SystemUserPhone: This is the user's phone number. It is a character string, and has a maximum size of 64
characters. Example setting for this item: SystemUserPhone=user telephone number.
SystemPhysicalLocation: This is a short description of the location of the HP Vectra PC. It is a character
string, and has a maximum size of 64 characters. Example setting for this item:
SystemPhysicalLocation=where the system is.
PCSerialNumber: This is the PC's serial number. You can find it on the back of the HP Vectra PC. It is a
character string, and has a maximum size of 64 characters. Example setting for this item:
PCSerialNumber=serial number of the HP Vectra PC. You don't need this field if the serial number can
be obtained automatically.
PCAssetNumber: If your company uses asset numbering, this is the asset number of the HP Vectra PC. It is
a character string, and has a maximum size of 64 characters. Example setting for this item:
PCAssetNumber=asset number of the PC.
MonitorSerialNumber: This is the monitor serial number. You can find it on the back of the monitor. It is
a character string, and has a maximum size of 64 characters. Example setting for this item:
MonitorSerialNumber= serial number of the non-DDC monitor. You don't need this field if the monitor,
BIOS and operating system support DDC calls.
MonitorAssetNumber: If your company uses asset numbering, this is the asset number of the monitor. It is
a character string, and has a maximum size of 64 characters. Example setting for this item:
MonitorAssetNumber= asset number of the monitor.

10.3 Running SETUP.EXE

Once the DMISETUP.INI or SETUP.INI file is configured, the files would be distributed to the target PCs.
On each of the Target PCs, execute Setup.exe with the desired command line options.
HP Toptools Deployment Guide Version 5.5
HP Toptools
106