Roland E-4 Owner's Manual page 36

Setting the Menu
Item Controller
[REVERB] slider
MIDI CLOCK
SYNC
*1: When using with another port besides the USB HOST 3 port on the MX-1, the unit starts up in battery-only mode. To use
battery-only mode, turn on the power while holding down the [C] button.
MIDI settings
MIDI
Function
messages
Note On/Off Controls the vocoder pitch using note numbers. The [AUTO PITCH] button blinks when notes are
ROBOT
NOTE
PITCH Pitch Bend
Timing Clock Controls the looper that synchronizes with the tempo data.
SYNC
36
Value
Avto, Int,
NIDI, USB
(Auto, Int., MIDI,
USB)
being input.
When the [HARMONY] button is lit, a maximum of four chords can be controlled.
Controls the [PITCH] slider value.
Press the [â/ó (play/record)] and [ð (stop)] buttons to schedule playback and recording. The playing
back or recording starts when the dot in the bottom right of the display lights up.
Set this timing with the SYNC RATE in system setting.
Explanation
Sets which synchronization signal is used by this unit.
Avto (Auto): Inputted clocks are accepted.
Int (Int): The unit operates according to its internal clock.
NIDI (MIDI): Only MIDI input is accepted.
USB (USB): Only USB MIDI input is accepted.
* Note that when an external device is connected to the SYNC
IN jack, the unit always synchronizes to the clocks that are
inputted to the SYNC IN jack.
Explanation