Advertisement
5. Follow the instructions in
6. Restart the system and press F2 immediately to enter the BIOS Setup menu.
7. In the BIOS Setup menu, go to System Configuration > Dust Filter Maintenance and select from any of the following
intervals: 15, 30, 60, 90, 120, 150, or 180 days.
NOTE:
By default, the Dust Filter Maintenance setting is disabled.
NOTE:
Alerts are generated only during a system reboot and not during normal operating system operation.
NOTE:
To clean the dust filter, brush or gently vacuum and then wipe down the external surfaces with a moist cloth.
After you
install.
OptiPlex Small Form Factor Dust Filter
11
Advertisement
