Philips Prestige S9000 Manual page 55

Problem
I replaced the
shaving heads,
but the display
still shows the
replacement
reminder.
A shaving
unit symbol
has suddenly
appeared on the
display.
The notification
symbol flashes
and the shaver
beeps while the
shaver is charging.
The notification
symbol flashes
and the shaver
beeps when I try
to shave.
The notification
symbol flashes
and the shaver
beeps after
cleaning the
shaving heads.
Water is leaking
from the bottom
of the appliance.
Possible cause
You have not reset
the appliance.
This symbol reminds
you to replace the
shaving heads.
The appliance is
overheated.
The shaving heads
are soiled.
The shaving heads
are damaged.
During cleaning,
water may collect
between the inner
body and the
outer shell of the
appliance.
54 54
Solution
Reset the appliance
by pressing the on/
off button for approx. 7
seconds.
Replace the
shaving heads (see
'Replacement').
When this happens, the
shaver stops charging
automatically. Charging
continues once the
temperature of the
shaver has decreased
to the normal level after
approx. 10 minutes.
Clean the shaving heads
(see 'Cleaning and
maintenance').
Replace the
shaving heads (see
'Replacement').
This is normal and not
dangerous because all
electronics are enclosed
in a sealed power unit
inside the appliance.
English