Chapter 4. Operational Instruction; Power On/Off Switch; Power Indicator; Menu Features - HP V196 User Manual

Table of Contents

Press the button to power on/off your monitor.

Note: The ON/OFF switch does not disconnect your monitor from the main voltage. To completely

disconnect the main voltage, remove the power plug from the electrical outlet.

The power LED is blue when the monitor operates normally. If the monitor runs in power-saving

mode, the indicator changes to amber. When the monitor is turned off, this indicator is unlit.

The following features of your monitor can be accessed and adjusted by using the on screen display

(menu) system.

If your monitor is not powered on, press the "Power" button to turn it on.

Press the "Menu" button to activate the OSD menu. The OSD main menu will be displayed.

To view the main menu or submenu, press the "+" on the front panel of your monitor to scroll up

or the "-" to scroll down. Then press the "OK" button to select a highlighted function.

When the highlight scrolls down to the bottom of the menu, it returns to top of the menu. When

the highlight scrolls up to the top of the menu, it returns to bottom of the menu."

To adjust the selected option, press the "+" or "-" button.

Select "Save" and return. If you do not want to save the setting, select "Cancel" from the

submenu or "Exit" from the main menu.

Press the "Menu" button to exit from the OSD menu.

Chapter 4. Operational Instruction

Table of Contents