Table of Contents
Advertisement
Wireless-G Notebook Adapter with SRX
Windows Configuration Checkbox
A checkbox entitled Use Windows to configure my wireless networks is located just below the top display section.
Select this checkbox to use Wireless Zero Config (WZC) to configure the Adapter. If you use WZC to configure the
Adapter, you can still use the Wireless Network Utility to monitor available networks and check connection status.
Site Survey (Available Networks) List
The Site Survey section of the Wireless Network Utility window lists all the working networks within radio range
of your Adapter. The following information is presented:
Icon
Column
SSID
SSID
Signal quality
Signal quality
Signal quality
Signal quality
Signal quality
Security
Security
Channel
Chapter 6: Using the Wireless Network Utility
Navigating the Utility
Description
Name of the network, associated
Name of the network, not associated
Signal strength, as a percentage: Four solid green bars, 60% or greater
Signal strength, as a percentage: Three solid green bars, one hollow
green: 40-60%
Signal strength, as a percentage: Two solid yellow, two hollow yellow
bars, 20-40%
Signal strength, as a percentage: One solid yellow bar, three hollow
yellow bars, 5-20%
Signal strength, as a percentage: All red hollow bars, less than 5%
Open security
WEP security
Current radio channel used for communications between the Adapter
and the access point
13
Advertisement
Table of Contents
