Advertisement
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
HELP01
NOTE ON PUTTING ADHESIVE SHEET (SP)
Be careful not to put adhesive sheet (SP) out of cavity for speaker.
Piezoelectric buzzer
(2.0cm)
MC-190 flexible board
HELP02
Positioning sheet for soldering
the piezoelectric buzzer (SP901)
When soldering, print this sheet and use this as a
workbench for positioning.
cm
0
1
2
3
4
5
DSC-T300_L2
BT holder assy
Adhesive sheet (SP)
Piezoelectric buzzer
(2.0cm)
MC-190 flexible board
HELP
0.1mm
Note: Use this drawing in its actual scale.
If you cannot print this out in its actual scale, the PC
or printer setting is a probable cause.
In such a case, use a photocopier or another tool to
obtain the actual size.
Note: Be sure not to put the soldering height
higher than 0.7mm.
BT holder assy
Edge of cavity
for speaker
Adhesive sheet (SP)
HELP
Advertisement
