To Use The Microphone With Multi-Channel Audio; Adjusting Speaker Volume - HP Pavilion 525 Quick Start Manual

Note:
If you want to play a stereo DVD, repeat
these steps (1 through 5) and change the
audio properties for WinDVD to match the
DVD output.
To use the microphone
with multi-channel audio
The multi-channel speaker system connects to
the PC using the Microphone, Audio (Line) In,
and Audio (Line) Out connectors on the back
of the PC.
Your PC may have another microphone
connector in the front of the PC under the
access door. If present, this microphone
connector is ready to use.
To use the back microphone connector, you
must disconnect your multi-channel speakers
system and select 2 channel audio setup.
To change the audio configuration, see
"To configure multi-channel audio output
for speakers configuration" on page 28.

Adjusting speaker volume

You can adjust speaker volume by:
Using the volume knob or buttons on the
■
keyboard.
Using the volume knob on the speakers
■
(select models only).
Using the Volume icon on the taskbar.
■
If you do not see this Volume icon, click Start,
Control Panel, Sounds, Speech, and
Audio Devices, if it is present, and then
double-click Sounds and Audio Devices to
open the Sounds and Audio Devices Properties
window. On the Volume tab, place a check in
the Place volume icon in the taskbar
check box. Click Apply, and then click OK.
The Volume icon appears in the taskbar.
Note:
Some applications may result in low volume,
even when the volume knob is turned to its
maximum position. If this is the case, double-click
the Volume icon on the taskbar and increase the
Volume.
29
Quick Start Guide