HP Media Center,Pavilion Media Center m7780 Start Here Manual page 59

The following table shows the possible AV connection types, listed in order of decreasing video playback quality
(from best to good).
Cable
The remainder of this chapter describes how to connect optional equipment, including the audio connections when
applicable. The order follows that of the preceding table.
WARNING: Before connecting optional equipment, unplug the power cord for the TV and all
connected components. Ensure that the optional equipment is turned off.
Port Connection description
HDMI transmits an all-digital signal and is the recommended
choice for playback from a digital DVD or DVR.
It is capable of transmitting both uncompressed digital audio
and digital video signals, because it has video, audio and
control signals.
For more information, see "Connecting an HDMI device."
DVI transmits an all-digital video signal for playback from a
digital DVD or DVR.
For more information, see "Connecting a DVI device."
Component video transmits video as separate red (Pr),
green (Y), and blue (Pb) signals. It is available in standard-
definition and high-definition (HD) versions.
It delivers higher quality than S-video and composite video
connections.
Example: A TV to a DVD player.
For more information, see "Connecting to component video."
S-video transmits video. (The "S" stands for "separate.")
It delivers a sharper image than a composite video connection.
Example: A TV to a VCR.
For more information, see "Connecting to S-video."
Composite video transmits video as a single signal. It usually
has a yellow tip.
It delivers a less sharp image than component video and S-video
connections.
Example: A DVD/VHS player to a TV.
Connecting the Television Signal and Video Cables
53