HP Kayak XU03 Installation Manual page 4

HP Kayak XU 03xx PC Workstation — Installing Accessories In Your HP PC Workstation
Removing and Replacing the Cover
Replacing the Cover
1 Ensure that you have installed all your accessories and that all
2 Ensure that the two latches on the front sides of the cover are lifted
3 Slide the cover onto the computer, making sure that the two guides
4 Lower the latches on the front sides of the cover.
5 If required, lock the cover using the key provided.
6 Reconnect all the power cables.
Step 3
Press here on
both sides of the
PC's cover.
4 English
internal cables are properly connected and safely routed.
up, and that the lock is unlocked.
at the bottom of the case slide into the two rails at the base of the
computer. Firmly slide the cover backwards into position.
Step 5
Step 4