Installing Mass Storage Devices; Connecting Devices - HP Kayak XA05 Installation Manual

HP Kayak XA 05xx PC Workstation — Installing Accessories In Your HP Desktop PC Workstation

Installing Mass Storage Devices

Installing Mass Storage Devices

Connecting Devices

If you add an IDE Zip drive, hard disk drive, CD-ROM drive, CD-RW
drive, or tape drive, you need to connect it to power and data cables.
The data cables and connectors provided are shown below:
Two IDE data cables each
with two 40-pin connectors
for IDE Drives, such as
CD-ROM Drives, Zip Drives or
Hard Disk Drives.
On selected
models, a 16-bit
External 68-pin
SCSI connector
On selected
models, a 16-bit
SCSI cable with
four 68-pin
connectors.
10 English
34-pin connector 40-pin connector
Cable with one
connector for
3.5-inch Floppy
Disk Drive
40-pin connector
Power Cables for
Hard Disk Drives,
Zip Drives, Tape
Drives, CD-RW, and
CD-ROM Drives
Power Cable for
3.5-inch Floppy
Disk Drive