Page 1
Set up Access Point Mode for TP-Link RE350 1. Type http://tplinkrepeater.net or 192.168.0.254 on Browser, enter Username = admin / Password = admin and press Login...
Page 2
2. A pop up to Create a new username and password, if don’t want to, click a Plus sign (x) to close this window...
Page 7
9. At Settings page, on the left menu, select Network Choose Obtain an IP address automatically, press Save Choose DHCP Server: Auto and press Save...
Page 8
10. On the left menu, select Wireless and set up Wireless as desired 11. WPS : can set or not set...
Page 9
12. Status menu : if the customer doesn’t connect LAN cable from main Router to Access Point, Internet status will show “disconnect”...
Page 10
13. If LAN cable connected from main Router to Access Point, internet status will show a check mark at globe sign and IP Address obtained from main Router will be shown in below table 14. Wireless client : to check connected client...