Table of Contents
Advertisement
MOBILITY
Charging the vehicle
Vehicle equipment and
options
This chapter describes model-specific equip-
ment, systems and functions that are available
now and will be available in the future, even if
they are not available in the owned vehicle.
Additional information:
Vehicle equipment, refer to page 7.
General information
The vehicle can be charged using various
charging cables at charging stations, domestic
socket outlets or industrial sockets.
Control and monitoring of the charging process
are handled fully automatically. The charge
current strength can be set via iDrive.
Safety information
Warning
Improper working with electrical current can
lead to an electric shock due to high voltages
or high currents. There is a risk of fire or dan-
ger to life. Observe the general safety regula-
tions when working with electrical current.
Warning
A faulty and incorrectly designed charging
device at the charging location can cause
damage to the vehicle and overload the
power mains at the charging location. There
is a risk of fire and an injury hazard.
282
Charging the vehicle
Online Edition for Part no. 01405A546C7 - II/22
The manufacturer of your vehicle recom-
mends that, prior to your first use of a charg-
ing location, you have the compatibility of the
following components confirmed:
▷ Charging cable.
▷ Charging station.
▷ Domestic socket outlet and connected
circuits.
Warning
Damaged or worn chargers, for instance
worn contacts, can heat up. There is a risk of
fire. Only use chargers that are in good con-
dition.
Warning
Contact with live components can lead to an
electric shock. High voltage is present at the
charging connection. There is a risk of injury
or danger to life.
The manufacturer of your vehicle recom-
mends that work on the charging connection,
for instance cleaning, be performed by a
dealer's service center or another qualified
service center or repair shop.
NOTICE
The charging cable connected to the vehicle
and the charging cable connections may be
damaged due to mechanical load. There is a
risk of damage to property, among other po-
tential damage. Do not apply mechanical
loads to the charging cable and the charging
cable connections. Route the charging cable
to the vehicle freely and avoid stress due to
pulling or bending.
Advertisement
Table of Contents
