Adjusting Microphone Volume - HP Compaq Presario,Presario SR1309 Supplementary Manual

16
PC Basics Guide
1 Double-click the Volume icon on the taskbar. The Volume Control settings
window opens.
If you do not see this Volume icon, click Start, click Control Panel,
NOTE:
click Sounds, Speech, and Audio Devices, if it is present, and then
double-click Sounds and Audio Devices to open the Sounds and Audio
Devices Properties window. On the Volume tab, place a tick in the Place
volume icon in the taskbar tick box. Click Apply, and then click OK. The
Volume icon appears in the taskbar.
2 Select Options and click Properties.
3 In Adjust volume for, click Recording.
4 In Show the following volume controls, place a tick in the Microphone
tick box.
5 Click OK.
6 Click the Advanced button in the Microphone column. If you do not see the
Advanced button, select Options from the Recording Control window, and
then click Advanced Controls.
7 Place a tick in the Alternate Microphone tick box. (This box may be
labelled Mic2 Select or 1 Mic Boost.)
8 Click Close.
9 Click the X (Close) at the upper-right corner of the Recording Control window.

Adjusting Microphone Volume

If you need to adjust the volume of the microphone, follow the procedure below:
1 Double-click the Volume icon on the taskbar. The Volume Control
window opens.
2 Select Options and click Properties.
3 In Adjust volume for, click Recording.
4 In Show the following volume controls, place a tick in the Microphone
tick box.
5 Click OK.
6 Adjust the volume for Microphone. If the volume is now acceptable, proceed
directly to step 10.
If you do not see the Advanced button, select Options from the
NOTE:
Recording Control window, and then click Advanced Controls.
7 To make finer adjustments to the sound, click the Advanced button, and then
select the (Microphone) 1 Mic Boost tick box.
8 Click Close.
9 Repeat step 6, if needed.
10 Click the X (Close) at the upper-right corner of the Volume Control window.