Setting Up 6-Connector Sound - HP Compaq Presario,Presario SR1005 Getting Started Manual

34
Getting Started Guide
To test the speakers (multichannel speakers only), click the Test button.
NOTE:
The WinDVD control panel shows the speaker number being used. Click Stop.
6 Click OK.
If you want to play a stereo DVD, change the audio properties of WinDVD
NOTE:
to match the recorded DVD audio output.

Setting up 6-connector sound

PC models that include six sound connectors (select models only) on the back of
the PC, support up to eight channels of sound (7.1 speaker output) and use the
Sound Effect Manager to configure the software settings.
Identifying the six audio connectors (6-connector)
The PC supports a maximum of eight speakers in a multichannel speaker system
by using four of the six audio connectors on the back of the PC.
This PC also has digital audio out and digital audio in connectors for digital sound
devices such as a DVD recorder or a digital stereo receiver/amplifier.
The four connectors for the 6-connector multichannel speaker system are on the
back of the PC:
•
A Side speaker port (side)
•
B Rear speaker port (rear)
•
C Center speaker/subwoofer port (c/sub)
•
E Audio line out (out) for front speakers
The previous figure shows the six audio connectors arranged on the back of the
PC: the four connectors used for eight-channel audio and the connectors for the
microphone (D, mic) and the audio line in (F, in).