Table of Contents
Advertisement
Examples of Weekly timer
Example 1
7:00
9:00
Monday
Program 1 Program 2
to
On
Friday
26 °C
Wake up Leave for
work
Saturday
Sunday
Program 1
Off
(On)
Example 2: You can specify temperature settings using the On timer in
the Weekly timer.
7:00
9:00
Program 1
Program 2
On
On
28 °C
26 °C
6.2. On timer or Off timer
1. Select On timer or Off timer in step 2 of "Timer setting
procedure".
2. Press
(
Pressing the button: The time will change by +5/-5 minutes.
Pressing down the button: The time will change by +10/-10 minutes.
• To deactivate the On/Off timer, press
shown on the remote controller display.
The indicator will disappear.
6.3. Program timer
1. Set On timer and Off timer. (Refer to "6.2. On timer or Off
timer").
2. Select Program timer in step 2 of "Timer setting procedure".
The timer whose setting time is closer to the current time works fi rst.
The order of the timer operation is displayed as follows:
Timer
Indicator on the remote controller display
On→Off timer
Off→On timer
NOTES: You can set the Program timer only within a span of 24 hours.
6.4. Sleep timer
1. Select Sleep timer in step 2 of "Timer setting procedure".
2. Press
(
stops.
Each time you press the button, the time changes as follows:
0H
1H
2H
30M
00M
00M
(30 min.)
• To deactivate the Sleep timer, press
on the remote controller display.
The indicator will disappear.
During the Sleep timer operation, the setting temperature changes as
the following fi gure.
In Heating mode
1 °C 2 °C 3 °C 4 °C
30 min.
1 hour
1.5 hour
Set time
After the set time has elapsed, the air conditioner operation turns off.
En-7
11:00
17:00
Program 3
Off
On
28 °C
Come back
home
(No timer settings)
Program 2
Program 3
Off
Off
(On)
(On)
(On)
17:00
23:00
Program 3
Program 4
On
On
27 °C
28 °C
to set on time or off time.
)
while
to set the time until the operation
)
3H
5H
7H
00M
00M
00M
while
In Cooling or Dry mode
Set time
Set
temperature
1 hour
1 °C
7. ENERGY SAVING OPERATION
23:00
7.1. Economy operation
Program 4
Off
It saves more electricity than other operation modes by changing the set
temperature to a moderate setting.
Go to
Press
sleep
operation.
[
Program 4
Off
Operation
mode
Cooling/Dry
Heating
NOTES:
• In the Cooling, Heating, or Dry mode, the maximum output of this
operation is approximately 70 % of usual operation.
• This operation cannot be performed during the temperature
monitoring by the Auto mode.
8. OTHER OPERATIONS
8.1. Powerful operation
is
In the Powerful operation, the air conditioner will operate at maximum
power and strong airfl ow to cool down or warm up the room quickly.
NOTES: In multi connection, this function cannot be used.
Press
When activated, the indoor unit will emit 2 short beeps.
When deactivated, the indoor unit will emit 1 short beep.
The Powerful operation will be turned off automatically in the following
situations:
• The Powerful operation runs for a certain amount of time and the
room temperature reaches the set temperature in the Cooling, Dry,
or Heating mode.
• 20 minutes after the Powerful operation has started.
NOTES:
• The airfl ow direction and the fan speed are controlled automatically.
• The Powerful operation cannot be performed simultaneously with
Economy operation.
• The Powerful operation overrides the following operations. If
the following operations are set, they will start after the Powerful
operation fi nishes.
- Outdoor Unit Low Noise operation
- Energy Saving program
• If the wired remote controller (optional) is connected, this function is
restricted.
9H
00M
hours
8.2. Outdoor Unit Low Noise operation
is shown
The Outdoor Unit Low Noise operation lowers noise from the outdoor
unit. During this operation, the rotation number of the compressor
decreases and the outdoor unit fan rotates slowly.
NOTES: In multi connection, this function cannot be used.
Press
Noise operation.
While the Outdoor Unit Low Noise operation is activated,
on the remote controller is displayed.
The setting is preserved even if the air conditioner is turned off.
2 °C
to activate/deactivate the Economy
] indicator on the indoor unit will turn on.
Room temperature
Few degrees higher than the set temperature
Few degrees lower than the set temperature
to activate/deactivate the Powerful operation.
to activate/deactivate the Outdoor Unit Low
Indicator Lamp
TIMER
OPERATION
ECONOMY
: Lighting
: OFF
Advertisement
Table of Contents
