Beko BDIN Series User Manual page 49

Quick Guide
Adjusting the water softening system
Washing, rinsing and drying performance of your dishwasher will improve when the water
softening system is adjusted correctly.
To adjust the system, first learn the water hardness in your region and adjust as indicated
below.
• Unpack the test strip.
• Open the tap and let the water flow for approx. 1
minute.
• Dip in the test strip into the water for 1 second.
• Take out the strip from the water and shake it.
• Wait for 1 minute.
• Make the necessary adjustment according to the test
strip.
After detecting the water hardness:
1. After switching on your machine, press and hold the Menu key for 3 seconds.
Some models require pressing Menu key once to enter settings menu
2. Using <- and +> keys, proceed until the water hardness setting indicator becomes on ("r"
position will be displayed).
3. Using the Selection key, adjust water hardness level according to the hardness of the
supply water. For correct setting please see "Water hardness level setting table".
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness English Water
Level Hardness °dE
Level 0
0-5
Level 1
6-9
Level 2
10-15
Level 3
16-19
Level 4
20-24
Level 5
25-62
German Water French* Water
Hardness °dH Hardness °dF
0-4 0-8
5-7 9-13
8-12 14-22
13-15 23-27
16-19 28-34
20-50 35-90
Level 0
Level 1
Level 2
Level 3
Level 4
Level 5
Water Hardness Level Indicator
Press the Selection key to switch the water hardness level
to position 1. (r1)
Press the Selection key to switch the water hardness level
to position 2. (r2)
Press the Selection key to switch the water hardness level
to position 3. (r3)
Press the Selection key to switch the water hardness level
to position 4. (r4)
Press the Selection key to switch the water hardness level
to position 5. (r5)