Advertisement
Quick Links
PHYWE Systeme GmbH & Co. KG
Robert-Bosch-Breite 10
D–37079 Göttingen
+49 (0) 551 604–0
Telefon
+49 (0) 551 604–107
Fax
E-mail
info@phywe.de
Internet
www.phywe.com
Operating
instructions
The unit complies
with the applicable
EC-guidelines
TABLE OF CONTENTS
1
SAFETY PRECAUTIONS
2
PURPOSE AND CHARACTERISTICS
3
FUNCTIONAL AND OPERATING ELEMENTS
4
NOTES ON OPERATION
5
HANDLING
6
TECHNICAL DATA
7
SCOPE OF DELIVERY
8
ACCESSORIES
9
CONFORMITY
10 DISPOSAL
www.phywe.com, © All rights reserved
Cobra SMARTexperiment - Hooke's Law
Fig. 1: 12970-00 Cobra SMARTexperiment – Hooke's Law
1
SAFETY PRECAUTIONS
Caution!
Carefully read these operating instructions completely
before operating this instrument. This is necessary to
avoid damage to it, as well as for user-safety.
Use the unit only for its intended purpose
Only use the instrument for the purpose for which it was
designed.
Do not open the unit.
Protect the instrument from dust, moisture and vapours.
Use a slightly moist lint-free cloth to clean the instrument.
Do not use aggressive cleaning agents or solvents.
2
PURPOSE AND CHARACTERISTICS
With the SMART experiment "Hooke's law", Hooke's law -
elastic deformation is proportional to the applied load - can
be illustrated with a simple set-up.
12970-00
1
12970-00 / 1821
Advertisement
Related Manuals for PHYWE Cobra SMARTexperiment
Summary of Contents for PHYWE Cobra SMARTexperiment
- Page 1 Internet www.phywe.com Operating instructions The unit complies with the applicable EC-guidelines Fig. 1: 12970-00 Cobra SMARTexperiment – Hooke’s Law TABLE OF CONTENTS SAFETY PRECAUTIONS SAFETY PRECAUTIONS Caution! PURPOSE AND CHARACTERISTICS Carefully read these operating instructions completely FUNCTIONAL AND OPERATING ELEMENTS before operating this instrument.
- Page 2 Fig. 6 Mounted sensor 3.2.4 Clip the sensor holder to the top of the pole and press 3.2 Assembly the Cobra SMARTsense Motion Sensor into the holder. Fig. 6+7 Mounting the motion sensor Fig. 3 www.phywe.com, © All rights reserved 12970-00 / 1821...
- Page 3 If the sensor is to be used via the USB interface, it does not need to be switched on. The sensor is connected directly to the end device using the supplied USB cable. Fig. 9 Springs www.phywe.com, © All rights reserved 12970-00 / 1821...
- Page 4 It is not necessary to switch on the sensor. The sensor is automatically recognized and dis- played. It can be selected and connected directly. CONFORMITY PHYWE Systeme GmbH & Co.KG hereby declares that the radio system type 12970- TECHNICAL DATA 00 complies with the 2014/53/EU directive.