Status; Rev; Modules (T1/Pri) Menu - ADTRAN ATLAS 800 User Manual

» Status
» Rev

Modules (T1/PRI) Menu

»» Controller Info
»» Alarm Status
61200180L1-1
Read security: 5
Displays status information on the ATLAS_800 T1/PRI ports and other
installed modules as follows:
Online
The module is enabled and is responding to the system
controller's status polls. This is the normal response of the
system.
No Response
The module is enabled but is not responding to the sys-
tem controller's status polls. This response indicates a
problem in the system or that the module is not installed.
Empty The system controller has not detected the presence of a
module in the system, nor has a module been manually
enabled for this option slot.
Offline The modules is installed but has been taken Offline by a
user. The module is still responding to controller polls.
Offline/No
The module is installed but has been taken Offline by a
Response: user. The module is not responding to polls.
Read security: 5
Displays the hardware revision of the ATLAS_800.
This section provides detailed information on the Modules / Menu sub-
menus. Menu provides access to commands that allow you to review the sta-
tus of various options, change the configuration for general parameters, and
initiate tests. This section only describes the menu options for the T1/PRI
controller port (the ATLAS_800 Base Unit). For details on menu options for
individual modules, refer to the appropriate module manuals.
Read security: 5
Displays general information about the ATLAS_800 Base Unit and T1/PRI
ports as follows:
Part Num
Displays the part number of the ATLAS_800.
PLL Status Indicates whether the clock is locked to its specific
(Phase Lock Loop)
source.
Read security: 5
Displays any active alarms as follows:
Prt Port number displayed.
Loss of Signal No signal detected on port interface.
(LOS)
Red Alarm
Not able to frame data received on the port. Alternate-
(RED) ly referred to as Out of Frame (OOF).
ATLAS 800 User Manual
Chapter 7. Modules Terminal Menu
7-3