Single-Ended Connections
NI-9209 Connection Guidelines
Make sure that devices you connect to the NI-9209 are compatible with the
■
module specifications.
You must use 2-wire ferrules to create a secure connection when connecting
■
more than one wire to a single terminal on the NI-9209 with spring terminal.
Push the wire into the terminal when using a solid wire or a stranded wire
■
with a ferrule.
Open the terminal by pressing the push button when using stranded wire
■
without a ferrule.
High-Vibration Application Connections
If your application is subject to high vibration, NI recommends that you use the
NI-9940 backshell kit to protect connections to the NI-9209 with spring terminal.
Overvoltage Protection
The NI-9209 provides overvoltage protection for each channel.
Note
Refer to the NI-9209 Specifications on
information about overvoltage protection.
Where to Go Next
AI
+
Voltage
Source
–
COM
NI-9209 Getting Started
NI 9209
ni.com/manuals
for more
© National Instruments
9