Adjusting Image Quality; Manual Adjust; Chapter 2 Copying - Canon PIXMA MP150 User Manual

Adjusting Image Quality

You can adjust the image quality according to the document to be copied.
Follow this procedure:
1
Press [COPY].
2
Press [Menu] repeatedly until <IMAGE QUALITY> appears.
5.IMAGE QUALITY
3
Use [ ] or [
<STANDARD>:
<HIGH>:
<FAST>:
4
Press [OK].
Note
Adjusting Exposure (Intensity)
Exposure (intensity) is the degree of difference between light and dark. Increasing the exposure
setting further blackens dark areas and whitens bright areas. Conversely, decreasing the
exposure setting reduces the difference between bright and dark areas. You can adjust the
exposure between five gradations.
Follow this procedure:
1
Press [COPY].
2
Press [Menu] repeatedly until <INTENSITY> appears.
4.INTENSITY

MANUAL ADJUST

3
Use [ ] or [
If you select <MANUAL ADJUST>, press [OK] and then use [
press [ ] to increase the density.
4
Press [OK].
If you select <AUTO ADJUST (A)>, the message <(A)> appears on the LCD.
Chapter 2
STANDARD
] to select the image quality.
Suitable for text-only documents.
Suitable for photographs.
Suitable for high speed copying at a lower image quality.
When using <FAST>, if the quality is not as good as expected, select
<STANDARD> or <HIGH> and try copying again.
Select <HIGH> to copy in grayscale. Grayscale renders tones in a
range of grays instead of black or white.
] to select the <MANUAL ADJUST> or <AUTO ADJUST (A)>.
] to decrease the density, or
Copying
29