Canon VIXIA HF S30 Instruction Manual page 139

Converting Scenes into Standard Definition
1 Power the camcorder using the compact power adapter.
2 Make sure there is a memory card in slot Y with sufficient
available space.
3 Open the [Original], [Playlist] or [Video Snapshot] → [Original]/
[Playlist] index screen.
• Select the f tab to convert scenes from the built-in memory or the
4 tab to convert scenes from memory card X.
• [Original] or [Video Snapshot] → [Original] index screen: To convert all
the scenes recorded on a specific date, narrow down the scenes
shown to scenes recorded on that date (0 58).
4 Touch [a] to open the scene selection screen.
When you convert scenes from the [Playlist] index screen (including the
playlist of video snapshot scenes), you cannot select individual scenes;
instead, the entire playlist will be converted. Skip directly to step 6.
5 Touch on the individual scenes you want to convert.
• A checkmark O will appear on scenes selected. Touch a selected
scene again to remove the checkmark.
• To select all the scenes at once: Touch [Select All] instead of
touching individual scenes. (Remove in advance any checkmarks
from scenes you may have selected individually.)
8
6 Touch [Edit]
conversion screen.
• If a copyright notice appears, read it carefully and touch [OK] if you
agree.
• touch [5] to change the conversion settings as described below.
8
7 Touch [Yes]
Touch [B] to interrupt the operation while it is in progress.
To embed the recording date and time
The recording date and time will always be displayed on the converted
scene.
8
[5] [Embed Date/Time]
[Convert HD9SD (x DVD)] to open the HD9SD
[OK].
8 8
[On] [f]
External Connections
8
[f]
139