Canon PIXMA MP510 Quick Start Manual page 57

Cleaning the Paper Feed Rollers (Roller Cleaning)
Clean the paper feed rollers if paper is not fed properly.
Cleaning the Paper Feed Rollers of the Auto Sheet Feeder
Cleaning the paper feed rollers of the Auto Sheet Feeder will wear the rollers, so perform this
only when necessary.
1
Make sure that the machine is turned on, and then remove any paper from the Auto
Sheet Feeder and Front Feeder.
2
Press the Paper Feed Switch to select the Auto Sheet Feeder.
3
Clean the paper feed rollers.
(1) Press the Menu button.
(2) Use the [ or ] button to select Maintenance/settings, then press the OK button.
The Maintenance/settings screen is displayed.
(3) Use the [ or ] button to select Maintenance, then press the OK button.
The Maintenance screen is displayed.
(4) Use the { or } button to select Roller cleaning, then press the OK button.
The confirmation screen is displayed.
(5) Use the { or } button to select Yes, then press the OK button.
The Paper Feed Rollers will rotate as they clean.
4
Repeat step 3 twice.
5
Open the Front Feeder and extend the Paper Output Support.
6
Load three or more sheets of A4 or Letter-sized plain paper in portrait orientation in
the Auto Sheet Feeder.
Set the Paper Thickness Lever to the left.
7
Repeat step 3 three times.
The paper cleans the Paper Feed Rollers as it feeds through the machine.
If there are no signs of improvement after performing cleaning three times, contact a Canon
service representative.
Cleaning the Paper Feed Roller of the Front Feeder
1
Turn off the machine.
2
Load five or more sheets of A4 or Letter-sized plain paper in the Front Feeder.
Note
Paper is loaded to aid the cleaning process and will not be printed on.
Routine Maintenance 53